> Source: https://blenderlaunchpad.site/blog/blender-water-material/ · Last updated: 2026-11-04

# Blender water material: glass-style water with absorption

For a Blender water material, use a Principled BSDF with Transmission Weight 1 and Roughness 0 on a closed mesh, plus Volume Absorption for the water tint.

*Materials · Published 2026-11-04*

To make a water material in Blender, put a **Principled BSDF** on a closed mesh with **Metallic** 0, **Transmission › Weight** 1 and **Roughness** 0, then plug a **Volume Absorption** node into the **Volume** input of the Material Output node for the tint. The Blender 5.2 LTS manual names water as a typical use for Volume Absorption and describes absorption in glass as a refracting surface shader combined with an absorption shader for the interior.

This guide shows that water material blender setup step by step, how to choose an IOR, how to add ripples, and which settings differ in EEVEE and Cycles. It builds on our [glass material guide](https://blenderlaunchpad.site/blog/blender-glass-material/), so we only repeat the parts water needs.

## How to make a water material in Blender

1. **Check the mesh.** The water must be a closed volume, such as the water inside a glass or a thick slab for a pool. The manual says meshes used for volume rendering should be closed and manifold, with no holes, and with normals pointing outward. It adds that these rules are the same as for rendering glass refraction correctly.
2. **Select the object** and open the **Material Properties** tab. Click **New** if it has no material.
3. **Open the Shading workspace.** Set the 3D Viewport to **Material Preview** or **Rendered** shading.
4. **Set up the surface.** On the Principled BSDF set **Metallic** to 0.0, **Transmission › Weight** to 1.0 and **Roughness** to 0.0. The manual defines Transmission Weight as a mix between a fully opaque surface at zero and a fully transmissive one at one, and says Roughness 0.0 is perfectly sharp.
5. **Set the IOR.** See the next section.
6. **Add the volume.** Add a **Volume Absorption** node and connect its **Volume** output to the **Volume** input of the Material Output node. The manual says the output must be plugged into that input.
7. **Choose Color and Density.** **Color** is the color of the volume. **Density** sets how strong the absorption is.

You should now see a clear, bending surface with a color that deepens where the water is thicker. In EEVEE you also need the material settings covered below.

![Four-step diagram of a water material in Blender: first the surface, a Principled BSDF with Transmission Weight 1 and Roughness 0; second the volume, a Volume Absorption node plugged into the Volume input of the Material Output; third surface detail, a Bump node driven by a Noise or Wave texture; fourth engine settings, Dithered render method and Raytraced Transmission in EEVEE or transmission and volume bounces in Cycles.](https://blenderlaunchpad.site/assets/blog/fig/blender-water-material-fig1.svg)

*The four parts of a glass-style water material.*

## What IOR should water use?

The manual does not give an IOR table for materials, so there is no official "water" preset. It does give two clues. First, the Principled BSDF page says the default IOR of 1.5 is a good approximation for glass. Second, in its Thin Film section it says the default thin film IOR of 1.33 is a good approximation for water. That is the manual's own water number, so 1.33 is a reasonable value for the main **IOR** input. We treat it as an inference from that remark, not a rule stated for the main input.

The manual also says that at an IOR of 1.0 rays pass straight through, and that higher values give more refraction.

## Water color with Volume Absorption

The Volume Absorption node lets light be absorbed as it passes through the volume. The manual's volume page says it blocks part of the light and lets other light pass straight through, similar to the Transparent BSDF, and that it can be used for colored glass objects or mixed with Volume Scatter.

- **Clear water** needs a very light touch. Use a pale **Color** and a low **Density**. The manual explains that higher density means more particles per unit volume, so more chance that light is absorbed.
- **Tinted or deep water** needs a stronger Color and more Density.
- **Cloudy or murky water.** Add a **Volume Scatter** node. The manual says it lets light scatter in other directions as it hits particles, and its anisotropy value sets whether light scatters evenly (0), mostly backward (negative) or mostly forward (positive). Combine it with absorption using an Add Shader node. That Add Shader wiring is our suggestion, since the manual only says absorption can be mixed with scatter.
- **One node for everything.** The **Principled Volume** node combines scattering, absorption and emission.

The manual does not give density values for water, so use the preview and adjust.

## Ripples and waves on the surface

A perfectly flat water surface looks fake. You have two manual-documented routes.

### Small ripples: Bump with a texture

Connect a **Noise Texture** or **Wave Texture** to the **Height** input of a **Bump** node, then connect the Bump node's **Normal** output to the **Normal** input of the Principled BSDF. The Bump node makes a perturbed normal from a height texture, with **Strength** and **Distance** controls. The Wave Texture adds procedural bands or rings with noise distortion, and its **Type** can be Bands or Rings.

Bump changes shading only. It does not move the surface, so silhouettes stay flat. For the node basics, see [Blender material nodes](https://blenderlaunchpad.site/blog/blender-material-nodes/).

### Large water: the Ocean modifier

For a sea or lake, the manual describes the **Ocean** modifier, which simulates a deforming ocean surface and is intended for deep ocean waves and foam. Under **Geometry**, **Generate** creates a tiled mesh grid. The **Spectrum** list includes **Turbulent Ocean** for turbulent seas with foam, and **Shallow Water**, which the manual says suits small lakes and ponds without heavy wind. The animated look comes from animating **Time**. Foam needs the **Foam** option and a named **Data Layer** so the renderer can read the foam data.

A generated ocean is a surface, not a closed volume, and the manual does not describe combining it with volume absorption.

## Water in EEVEE

The manual says EEVEE shares the node system with Cycles but not every feature. For refraction, the same settings as glass apply.

- **Render Method.** In **Properties › Material › Settings**, **Dithered** is compatible with render passes and raytracing. With it, the manual says, **Raytraced Transmission** uses raytracing to find the transmitted color instead of only light probes.
- **Thickness.** EEVEE approximates the inside of an object with a Thickness value, set in **Properties › Material › Thickness** or through the Thickness input of the Material Output node.
- **Volume Intersection.** In the material's **Volume** settings, **Fast** treats each face as a medium interface and is correct for manifold geometry with no inner parts. **Accurate** handles inner parts but has significant memory overhead.

Two EEVEE limits matter for water. The limitations page says volumetrics only support single scattering, and that they are rendered only for camera rays and do not appear in reflections, refractions or probes. It also says only one refraction event is correctly modeled. So a water-filled glass in EEVEE can lose some of the tint when seen through the glass wall. Cycles does not have that limit.

## Water in Cycles

Cycles is a path tracer, so refraction and volumes work physically. Three settings matter.

- **Bounces.** In **Render › Light Paths › Max Bounces**, **Transmission** and **Volume** have their own limits. If water renders dark, transmission paths may be cut off before they exit.
- **Multiple scattering.** The manual says the number of volume bounces is zero by default in Cycles, which gives single scattering. Murky water can look better with more bounces, at a cost in noise and render time.
- **Caustics.** The manual says path tracing can render them but may be too noisy. **Light Paths › Caustics** has **Reflective** and **Refractive** checkboxes to turn them off. This removes noise but also removes that light.

For a broader engine comparison, see [EEVEE vs Cycles](https://blenderlaunchpad.site/blog/blender-eevee-vs-cycles/). For clear, non-refractive materials, such as a thin film that just fades the background, see the [transparent material guide](https://blenderlaunchpad.site/blog/blender-transparent-material/).

## Why your water looks wrong

- **It looks like a flat gray shape.** Water mostly shows what is around it. Add an environment such as an HDRI, as in [how to use an HDRI in Blender](https://blenderlaunchpad.site/blog/blender-hdri/).
- **There is no tint at all.** The Volume Absorption output is not connected to the Volume input, or Density is near zero. Also check that the mesh is closed with normals pointing outward.
- **It renders black.** In Cycles, raise Transmission bounces. In EEVEE, check Dithered and Raytraced Transmission.
- **The tint appears inconsistent in EEVEE.** Volumetrics are not visible in refractions there. Try Cycles for the final render.

## Skip the node wiring with the Material & Lighting Vault

A convincing water material combines a surface, a volume, surface detail and engine settings. The [Material & Lighting Vault](https://blenderlaunchpad.site/vault/) is a Blender 5.2+ extension (the Metalight tab in the N panel) with 1,690 procedural materials: 1,000 core materials in 32 categories plus 690 Pro. They work in Cycles and EEVEE and need no UVs, since they use object coordinates by default (a Use UV option exists).

It also includes 200 lighting setups that measure the selected objects and build themselves around them, tuned for Cycles, plus 267 studio lights. Those help transparent liquids, which depend on what surrounds them. The set totals about 64 MB. The license covers personal and commercial use, without redistribution. It is a tool, not a course.

## Questions people also ask

### How do I make a water material in Blender?

Use a Principled BSDF with Metallic 0, Transmission Weight 1 and Roughness 0 on a closed mesh. Add a Volume Absorption node to the Volume input of the Material Output node for the water color.

### What IOR does water have in Blender?

The manual gives no material table. It says the default 1.5 approximates glass, and that a Thin Film IOR of 1.33 is a good approximation for water, so 1.33 is a sensible value to try.

### Why is my Blender water material not transparent?

Transmission Weight is probably still 0, or Metallic is above 0. In EEVEE, also check that Render Method is Dithered and Raytraced Transmission is on.

### How do I add waves to a water material in Blender?

For small ripples, drive a Bump node with a Noise or Wave texture. For a large surface, use the Ocean modifier, which simulates deep ocean waves and foam.

## How we checked this

We did not run Blender for this guide. We read these pages on November 4, 2026, and wrote only what they confirm:

- Blender Manual (5.2 LTS), read November 4, 2026: [Principled BSDF](https://docs.blender.org/manual/en/latest/render/shader_nodes/shader/principled.html), [Volume Absorption](https://docs.blender.org/manual/en/latest/render/shader_nodes/shader/volume_absorption.html), [Volumes](https://docs.blender.org/manual/en/latest/render/materials/components/volume.html), [Principled Volume](https://docs.blender.org/manual/en/latest/render/shader_nodes/shader/volume_principled.html), [EEVEE Material Settings](https://docs.blender.org/manual/en/latest/render/eevee/material_settings.html), [EEVEE Volumes](https://docs.blender.org/manual/en/latest/render/eevee/render_settings/volumes.html), [EEVEE Limitations](https://docs.blender.org/manual/en/latest/render/eevee/limitations/limitations.html), [Cycles Light Paths](https://docs.blender.org/manual/en/latest/render/cycles/render_settings/light_paths.html), [Cycles Volumes](https://docs.blender.org/manual/en/latest/render/cycles/render_settings/volumes.html), [Bump](https://docs.blender.org/manual/en/latest/render/shader_nodes/displacement/bump.html), [Wave Texture](https://docs.blender.org/manual/en/latest/render/shader_nodes/textures/wave.html), [Ocean modifier](https://docs.blender.org/manual/en/latest/modeling/modifiers/physics/ocean.html) and Glass BSDF.

The manual gives no water IOR for the main IOR input, no density or color values for water, and no recipe for a water surface with volume absorption together with the Ocean modifier. The 1.33 recommendation is our inference from the manual's Thin Film remark, and the Add Shader combination for murky water is our suggestion. We also could not confirm differences between Blender 4.x and 5.x for these nodes.
