> Source: https://blenderlaunchpad.site/blog/how-to-bevel-in-blender/ · Last updated: 2026-11-04

# How to bevel in Blender: Ctrl+B and the Bevel modifier

To bevel in Blender, select edges in Edit Mode, press Ctrl+B, scroll for segments and click. For a bevel you can change later, use the Bevel modifier.

*Hard surface · Published 2026-11-04*

To bevel in Blender, enter Edit Mode, select the edges you want to round, press Ctrl+B, move the mouse to set the width, scroll the mouse wheel to add segments, and click to confirm. If you want a bevel you can still change later, add a Bevel modifier from the Modifiers tab instead.

Both methods share the same settings, so once you understand one you understand the other. This guide shows each method step by step, explains the Width Type options that confuse most people, covers bevel weights for beveling only chosen edges, and lists the reasons a bevel looks wrong. It follows the Blender 5.2 LTS manual.

## How to bevel in Blender with Ctrl+B

The Edit Mode bevel changes the mesh directly. It is quick and good for one-off rounding.

1. **Select the object** and press Tab to enter Edit Mode.
2. **Select what to bevel.** Pick edge mode, then select edges. You can also select vertices or faces. The manual says the tool works from any of these selections.
3. **Start the tool.** Press Ctrl+B, or use **Edge** then **Bevel Edges** in the 3D Viewport header.
4. **Set the width.** Move the mouse. The bevel width follows it, and the value shows as you move.
5. **Set the segments.** Scroll the mouse wheel. More segments make a rounder bevel, because they add more edge loops across it.
6. **Confirm or cancel.** Click or press Return to confirm. Right-click or press Esc to cancel.

Right after confirming, open the **Adjust Last Operation** panel in the corner of the viewport. Every setting from the next section appears there, so you can change width and segments with numbers instead of the mouse.

## Bevel edges in Blender: the settings that matter

These are the options in the operator panel, as the manual names them:

- **Affect** switches between **Edges** and **Vertices**. Vertices rounds only the corners and leaves the edges alone.
- **Width Type** decides what the number measures. The table below explains all five.
- **Width** is the size of the bevel.
- **Segments** is the density of the new geometry.
- **Profile Type** is **Superellipse**, generated from **Profile Shape** (a value from 0 to 1), or **Custom**, a curve you draw yourself.
- **Clamp Overlap** stops a bevel from running past neighboring faces.
- **Loop Slide** controls whether the new inner edges run perpendicular to the bevel or follow existing inner edges.
- **Harden Normals**, **Mark Seams**, **Mark Sharp**, **Material Index** and **Face Strength** are for shading and bookkeeping, covered below.

Bevel vertices has its own shortcut. The manual lists **Bevel Vertices** under the Vertex menu with Shift+Ctrl+B. It rounds the selected vertices and leaves the edges unchanged. Bevel edges also bevels the vertices where three or more edges meet.

## The five Width Types, explained

Width Type is the setting that makes the same number give different results. According to the manual:

![Table of the five Bevel Width Types in Blender: Offset is the distance from the new edge to the original edge, Width is the distance between the two new edges, Depth is the perpendicular distance from the bevel face to the original edge, Percent is a percentage of the adjacent edge length, and Absolute is an exact distance along the adjacent edges.](https://blenderlaunchpad.site/assets/blog/fig/how-to-bevel-in-blender-fig1.svg)

*The Width Type options in the Bevel operator and the Bevel modifier.*

For most hard surface work, leave it on the default and change **Width** until it looks right. Switch to **Absolute** when you need an exact distance along the neighboring edges. The manual notes it differs from Offset when the unbeveled edges that meet there are not at a right angle.

## Use the Bevel modifier for a non-destructive bevel

The Bevel modifier rounds edges and corners without changing the mesh underneath. The manual presents it as the alternative to the Edit Mode operation, with the advantage that you can adjust the bevel at any time.

1. Select the object in Object Mode.
2. Open the **Modifiers** tab in the Properties editor.
3. Click **Add Modifier**, open **Generate**, and choose **Bevel**.
4. Set **Width** and **Segments**.
5. Choose a **Limit Method** to decide which edges get beveled.

The modifier panel header has three toggles: **Realtime** (the monitor icon) shows it in the viewport, **Render** (the camera icon) shows it in renders, and **Edit Mode** shows the result while you edit. Modifiers are evaluated from top to bottom, so where Bevel sits in the stack changes the result. When you are happy, **Apply** (Ctrl+A) makes the bevel permanent and removes the modifier.

### Limit Method: which edges get beveled

| Limit Method | What it bevels | Use it when |
| --- | --- | --- |
| None | Every edge | The model is simple |
| Angle | Only sharp edges, judged by the angle between neighboring faces | You want flat faces left alone |
| Weight | Edges with a bevel weight | You choose edges by hand |
| Vertex Group | Edges whose two vertices are both in the group | A region of the model gets a bevel |

The manual does not give a default Angle value, so check the field in your own modifier panel and adjust it until only the edges you want are picked up.

## Bevel only the edges you choose with bevel weight

Bevel weight is the most controllable way to bevel a hard surface model. You mark edges, and the modifier bevels only those.

1. Enter Edit Mode and select the edges.
2. Choose **Edge** then **Edge Bevel Weight**. The manual lists no shortcut for this operator, but Ctrl+E opens the Edge menu at the mouse cursor.
3. Move the mouse or type a number. The value shows at the top of the 3D Viewport.
4. Click or press Return to confirm.
5. In the Bevel modifier, set **Limit Method** to **Weight**.

With the Weight method, the modifier reads the `bevel_weight_edge` and `bevel_weight_vert` attributes set in Edit Mode. A weight of 0.0 means no bevel. Because it works as an attribute, you can keep different weights on different edges to get a big bevel on the outer shell and a small one on details.

## Make the bevel catch light: shading and normals

A bevel only reads as a bevel if it shades well. Three tools help, all named in the manual:

- **Harden Normals** smooth-shades the new bevel faces without affecting the faces around them, so flat faces stay flat. It needs custom split normals, and the manual says a `custom_normal` attribute is created automatically if missing.
- **Face Strength** sets face strength on the bevel faces, with the options **None**, **New**, **Affected** and **All**. The **Weighted Normal** modifier can then read it through its **Face Influence** option.
- **Smooth by Angle** is a modifier included as a Geometry Nodes asset in the Essentials asset library. It has an **Angle** field for the maximum angle that counts as smooth, and an **Ignore Sharpness** option that smooths all edges, including those marked sharp.

The Bevel modifier also has **Mark** options to carry Seam and Sharp markings through the bevel, and a **Material Index** to give the bevel faces their own material slot. A value of -1 takes the material of the nearest original face.

The **Segments** value matters here too. One segment gives a flat chamfer that catches a single highlight. Two or three segments give a soft rounded edge. More segments cost geometry, so pick the least that looks right on your closest camera. For softer, wider corners, see [soft bevels in Blender](https://blenderlaunchpad.site/blog/soft-bevel-blender/).

## Why your bevel is not working

- **Nothing happens in Edit Mode.** Nothing is selected, or you are in the wrong selection mode for what you want to bevel.
- **The modifier shows no bevel.** With **Limit Method** on **Weight**, edges with no weight get no bevel. Add weights, or switch to None or Angle.
- **Only some edges bevel with Angle.** The Angle value does not match your geometry. Raise or lower it.
- **The bevel overlaps itself.** The width is too large for the geometry. Lower **Width** or keep **Clamp Overlap** on.
- **The bevel looks lumpy or pinched.** Check the shading. Switch the object to smooth shading and use Harden Normals or a Weighted Normal setup, so the flat faces do not shade as if they were curved.
- **The result is uneven on a scaled object.** The manual warns that applying transforms can change how modifiers behave, so apply scale first with Ctrl+A in Object Mode (Object, Apply, Scale).
- **Bevel sits in the wrong place in the stack.** Modifiers run top to bottom. Move Bevel above or below a Boolean or Mirror and compare.

Bevels pair naturally with cutting, so read [the Boolean modifier guide](https://blenderlaunchpad.site/blog/blender-boolean/) next. For the wider workflow, see [hard surface modeling in Blender](https://blenderlaunchpad.site/blog/blender-hard-surface-modeling/) and [hard surface modeling tips](https://blenderlaunchpad.site/blog/hard-surface-modeling-tips/). A quick reference for the keys is in [the Blender bevel shortcut guide](https://blenderlaunchpad.site/blog/blender-bevel-shortcut/).

## Learn hard surface modeling in order with The Blender Launchpad

Bevels are one small piece of hard surface modeling. The harder part is knowing what to learn next: where to put edge loops, when to use a modifier, how to shade it, and how to get from a bevel to a finished model.

[The Blender Launchpad](https://blenderlaunchpad.site/) is a members app with a roadmap of hand picked, free YouTube lessons in six stages. The second stage is hard surface modeling, and the first assumes you have never opened Blender. It is a curated playbook, not original video lessons, so you spend your time following the best free material in the right order. It is one payment with no subscription.

## Questions people also ask

### What is the shortcut to bevel in Blender?

In Edit Mode, Ctrl+B bevels the selected edges and Shift+Ctrl+B bevels the selected vertices. Move the mouse for width, scroll for segments, and click to confirm.

### How do I bevel only some edges in Blender?

In Edit Mode, select just those edges before pressing Ctrl+B. For the modifier, mark them with Edge Bevel Weight and set the modifier's Limit Method to Weight.

### Should I use the Bevel modifier or Ctrl+B?

Use the modifier when you may want to change the bevel later, since it stays editable. Use Ctrl+B for quick permanent rounding on a mesh you will keep editing by hand.

### How do I bevel in Blender without changing the whole model?

Limit what gets beveled. Select only the edges you want in Edit Mode, or use the modifier's Angle, Weight or Vertex Group Limit Method.

## How we checked this

We did not run Blender for this guide. We read these pages on November 4, 2026, and wrote only what they confirm:

- Blender Manual (5.2 LTS), read November 4, 2026: Bevel (Edit Mode edge operator), Bevel modifier, edge data and bevel weight, Weighted Normal modifier, Smooth by Angle modifier, Introduction to modifiers and Apply.

We could not confirm the Angle limit's default value or any difference between Blender 4.x and 5.x for these tools, so we left both out.
