> Source: https://blenderlaunchpad.site/blog/how-to-export-uv-map-blender/ · Last updated: 2026-11-04

# How to export a UV map from Blender as PNG, SVG or EPS

To export a UV map in Blender, open the UV Editor in Edit Mode, choose UV > Export UV Layout, pick PNG, SVG or EPS, set the Size and save the image.

*UVs & texturing · Published 2026-11-04*

To export a UV map from Blender, enter Edit Mode, open the UV Editor, and choose **UV > Export UV Layout**. Pick a Format (PNG, EPS or SVG), set the Size in pixels, and save the file. You get an image of your UV edges that you can use as a guide in any painting application.

This guide follows the Export UV Layout section of the [Blender Manual](https://docs.blender.org/manual/en/latest/modeling/meshes/uv/editing.html) (5.2 LTS) and explains each option, what ends up in the image and what to do with it afterward. If you have not made a UV map yet, start with [how to UV unwrap in Blender](https://blenderlaunchpad.site/blog/blender-uv-unwrap/) or [how to UV map in Blender](https://blenderlaunchpad.site/blog/how-to-uv-map-in-blender/), then come back here.

![Four numbered steps to export a UV map in Blender: select faces in the 3D Viewport, open UV then Export UV Layout in the UV Editor, set Format, Size and Fill Opacity, then paint over the exported image in a painting application and import the texture back.](https://blenderlaunchpad.site/assets/blog/fig/how-to-export-uv-map-blender-fig1.svg)

*The export workflow: select, export, paint over the layout, bring the finished texture back.*

## How to export a UV map in Blender, step by step

1. **Open the UV Editor.** The quickest way is the **UV Editing** workspace tab at the top of the window. It shows the 3D Viewport next to the UV Editor. The Export UV Layout operator lives in the UV Editor and works in Edit Mode.
2. **Enter Edit Mode.** Hover over the 3D Viewport and press Tab. You should see your mesh's UV islands inside the square UV Editor grid. If the editor is empty, the mesh has no UV map yet, so unwrap it first.
3. **Select the faces you want in the image.** The manual is specific here: by default, only UV faces selected in the 3D Viewport are exported, and selections made only in the UV Editor are ignored. Press A in the 3D Viewport to select the whole mesh.
4. **Choose UV > Export UV Layout.** Use the **UV** menu in the UV Editor header. Blender opens a file browser where you pick the folder and file name, and the export options appear with it. The next section explains each one.
5. **Set Format and Size.** Choose PNG, EPS or SVG, and set the resolution in pixels. A PNG is the usual choice for painting software.
6. **Save the file.** Confirm the export. Open the saved file in an image viewer and check that the islands you expected are there.

This one operator answers every variant of the question: "export UV map Blender", "Blender export UV map" and "Blender save UV map" all lead here. Blender has no separate "save UV map" command, so you save the layout as a picture with Export UV Layout.

## Export UV Layout options explained

These are the properties listed in the manual for the operator.

| Option | What the manual says | When to change it |
| --- | --- | --- |
| All UVs | Export all UVs instead of only the faces selected in the 3D Viewport | You want the whole layout without selecting first |
| Export Tiles | Controls which UV tiles are exported: None, UDIM or UVTILE | Your mesh uses more than the 0 to 1 tile |
| Modified | Export the UVs from the evaluated mesh with modifiers applied | A modifier such as Mirror or Subdivision Surface changes the UV faces |
| Format | PNG, EPS or SVG | You need a vector file or a raster image |
| Size | The resolution of the exported image in pixels | Match your texture size |
| Fill Opacity | Sets the opacity of the face fill in the exported image | You want the faces tinted or left as outlines |

The three Export Tiles values are described like this in the manual. **None** exports only UVs in the [0, 1] range. **UDIM** exports tiles in the UDIM numbering scheme, 1001 + u_tile + 10*v_tile. **UVTILE** uses the scheme u(u_tile + 1)_v(v_tile + 1). Most single-texture objects stay on None.

## What the exported image contains

The exported image draws lines for the UV edges inside the standard UV Editor grid, which is the 0 to 1 UV space. The manual states that edges outside this range will not appear in the exported image. If an island sits outside the grid, move it inside (or use Export Tiles) before you export, or it will be missing from the file.

Because the layout is drawn within the grid, the image maps onto your texture space. That is what makes it usable as an overlay: lines in the export line up with the same places on the texture you paint.

### Selection decides what you get

The most common reason for an incomplete export is selection. With All UVs off, only the faces selected in the 3D Viewport are exported. Selecting islands only in the UV Editor does nothing for this operator. Either select the faces in the 3D Viewport first or turn on All UVs.

### The Modified option

When Modified is on, Blender exports the UVs from the evaluated mesh, which is the mesh after modifiers run. Use it when a modifier adds faces that have UVs. Leave it off if you want the layout of the mesh you actually unwrapped. If your export looks denser or more symmetrical than your base mesh, this is the first option to check.

## Choose a format: PNG, SVG or EPS

The manual lists three formats and does not rank them, so the choice depends on the program you use next.

- **PNG** is a raster image. Most painting and image editing programs open it without any setup, and Size sets its pixel dimensions.
- **SVG** is a vector format in general, so lines stay sharp at any zoom. It opens in vector tools and in most web browsers, which makes it handy for checking the layout.
- **EPS** is an older vector format that some print and illustration programs still ask for.

If you are unsure, export a PNG. You can repeat the export in another format at any time, because exporting does not change your mesh or its UVs.

## Set Size and Fill Opacity

**Size** is the resolution of the image in pixels. A practical rule is to export at the same size as the textures you plan to paint, so the guide lines match the canvas pixel for pixel. If you will paint a 4096 pixel texture, a 4096 pixel guide avoids any rescaling. This is our advice, not a requirement in the manual.

**Fill Opacity** sets how visible the face fill is. A low value leaves mostly outlines, which are easier to paint under. A higher value shows each face as a filled shape, which helps when you need to see which areas the faces cover. Try both on a small export and keep the one you can read.

## What to do with the exported UV map

The manual describes the intended workflow: open the exported image in a painting application and use it as a transparent overlay while creating textures. When the texture is finished, import it back into Blender and use it in a material.

1. **Open the layout as its own layer** in your painting program. Put your color painting on layers beneath the guide, so you can hide the guide at the end.
2. **Paint inside the islands.** Keep important detail away from island edges and extend color slightly past them, because a render can sample just beyond an edge.
3. **Hide the guide layer and export the texture** as a PNG or another image format your workflow uses.
4. **Bring it into Blender.** Add an Image Texture node to the object's material and load the file. See [how to add a texture in Blender](https://blenderlaunchpad.site/blog/how-to-add-texture-in-blender/) for the node setup. The manual's Image Texture node page says that if its Vector input is unconnected, the coordinate comes from the object's active UV map, so a plain image node already uses your UVs.

If you would rather paint inside Blender, you can skip the export entirely. [How to texture paint in Blender](https://blenderlaunchpad.site/blog/how-to-texture-paint-in-blender/) covers painting straight onto the model.

## If the export is empty, cut off or missing

- **The image is blank.** Nothing was selected in the 3D Viewport. Select faces there, or enable All UVs.
- **Part of the layout is missing.** That part lies outside the 0 to 1 grid. Move the islands inside, or set Export Tiles if you use tiles.
- **The Export UV Layout entry is not there.** The operator is in the UV Editor's UV menu and works in Edit Mode. Check that you are in the UV Editor and not the 3D Viewport.
- **The UV Editor shows nothing.** The mesh has no UVs or no faces are selected. Unwrap first with U in the 3D Viewport.
- **The layout looks different from your mesh.** Check the Modified option and any modifiers on the object.
- **Islands overlap.** Overlapping islands export as overlapping lines. Pack the islands in the UV Editor first so each face has its own area.

For overlap problems, see [our UV unwrap guide](https://blenderlaunchpad.site/blog/blender-uv-unwrap/), which covers packing and checking stretch.

## Skip the UV work with the Material & Lighting Vault

Exporting a UV layout is only needed when you paint or edit a texture outside Blender. If what you want is a good looking surface, the [Material & Lighting Vault](https://blenderlaunchpad.site/vault/) is a different route. It is a Blender 5.2+ extension, found in the Metalight tab of the N panel, with 1,690 procedural materials (1,000 core in 32 categories plus 690 Pro). They work in Cycles and EEVEE and need no UVs, because they use object coordinates by default, with a "Use UV" option if you want it.

There are also 67 weathering presets, such as rust, moss, snow, soot, cracks and edge wear, that work on any material, including your own. The Vault is a tool, not a course, with a personal and commercial license and a single payment.

If you want to learn UV and PBR texturing in order, [The Blender Launchpad](https://blenderlaunchpad.site/) includes it as the third of six stages, in a roadmap of hand picked free YouTube lessons. It is a curated playbook rather than original video lessons.

## Questions people also ask

### How do I export a UV map in Blender?

Enter Edit Mode, open the UV Editor, and choose UV > Export UV Layout. Select the Format (PNG, EPS or SVG), set the Size in pixels and save. Select the faces in the 3D Viewport first, or turn on All UVs.

### Can I save a UV map as a PNG in Blender?

Yes. The manual lists PNG, EPS and SVG as the export formats. PNG is a normal image file that painting applications open directly.

### Why is my exported UV layout blank or missing parts?

By default only faces selected in the 3D Viewport are exported, and edges outside the 0 to 1 UV grid do not appear. Select the faces in the 3D Viewport, enable All UVs, and move islands into the grid.

### What size should I export my UV map?

The Size option sets the pixel resolution. Match the resolution of the texture you will paint so the guide lines up with the canvas, such as 2048 for a 2048 pixel texture.

### How do I use the exported UV map?

Open it in a painting application as a transparent overlay while you paint, then import the finished texture into Blender through an Image Texture node on the material.

## How we checked this

We read these pages on November 4, 2026: the Blender Manual (5.2 LTS) section Editing UVs, including Export UV Layout and its Properties, and the Image Texture node page. We did not run Blender while writing this, so the exact look of the file browser can differ in your version. The manual does not describe the SVG or EPS contents, so our notes on those formats are general file format facts.
