> Source: https://blenderlaunchpad.site/blog/where-is-blender-render-saved/ · Last updated: 2026-11-04

# Where are Blender renders saved? Find or save your render

A still render (F12) is not saved to disk; it waits in Render Result until you use Image > Save As. Animations go to the Output path automatically.

*Rendering & camera · Published 2026-11-04*

Where is a Blender render saved? A still image from Render Image (F12) is not saved anywhere by default: it sits in the Render Result image until you save it with Image > Save As (Shift+Alt+S). An animation from Render Animation (Ctrl+F12) is written automatically to the File Path set in Output Properties.

This post shows how to get a still render out of Blender, how to find and change the folder an animation writes to, what the file format settings do, and where Blender keeps its temporary files. It follows the Blender Manual for version 5.2 LTS and points out where 4.x and earlier 5.x differ.

## Stills and animations are saved differently

![Two flows. A still render with F12 goes to Render Result in the Image Editor and is saved only with Image, Save As (Shift-Alt-S). An animation render with Ctrl-F12 goes to the File Path in Output Properties and is written automatically as numbered files such as image0001.png.](https://blenderlaunchpad.site/assets/blog/fig/where-is-blender-render-saved-fig1.svg)

*Stills wait in the Render Result until you save them; animation frames are written to the Output path as they render.*

The [Output panel](https://docs.blender.org/manual/en/latest/render/output/properties/output.html) section of the manual states the rule directly: by default, animation renders are saved automatically, while still renders are not. Still images must be saved manually from the Image Editor or written using a File Output Node.

That is why people lose renders. You press F12, a window shows the result, you close it and the image is gone, because it was never a file. The [Rendering Animations](https://docs.blender.org/manual/en/latest/render/output/animation.html) page explains the difference: a still is viewed and saved from the render buffer when it finishes, while an animation is a series of frames saved straight to disk as they render.

## How to save a still render (Render Result, Image menu, F11)

1. **Render the image.** Choose *Render > Render Image* in the top bar, or press F12. The manual's Render menu lists it as "Render the active scene at the current frame."
2. **Open the result window if it is hidden.** *Render > View Render* (F11) shows the Render window, and pressing it again switches back to the main Blender window. Where the render appears depends on *Render In* in Preferences: Keep User Interface, Maximize Area, Image Editor or New Window.
3. **Confirm you are looking at Render Result.** In the Image Editor header, the image data-block menu has a *Render Result* item, which the manual says displays renders. When it is selected, the Slot, View Layer and Render Pass selectors appear.
4. **Open the Image menu and choose Save As.** Use *Image > Save As* or Shift+Alt+S. The manual describes it as saving the image to a separate file of any type.
5. **Pick the folder, name and format.** The file browser has image output settings in a side panel. The manual says they are the same as the Render Output Properties, so you choose file format, color and quality there.
6. **Confirm the save.** The file now exists on disk, in the folder you picked.

The manual also lists *Image > Save* (Alt+S), which saves an image to its current path. A fresh Render Result has no path yet, so use Save As for a first save. The manual repeats the warning on that page: animation renders are automatically saved, still renders are not, and the latter have to be saved manually.

Look at the Image menu in the Image Editor header: the manual says it shows an asterisk when the image has unsaved changes. If you want to keep an earlier render while you test another, the manual says to select an empty Slot before rendering, and you can cycle through slots with J and Alt+J. Slots are for comparing renders; save the ones you want to keep.

## Where animation renders are saved: the Output path

For an animation, open the Properties editor and click the Output Properties tab, then look at the *Output* panel. The *File Path* field is the folder and file name Blender writes to. Per the manual, the frame number is appended with four padded zeros, such as `image0001.png`. Add `#` characters anywhere in the name to set your own padding: `image_##_test.png` becomes `image_01_test.png`.

The same page says the File Path expands Relative Paths, where a `//` prefix represents the directory of the current blend-file. A path that starts with `//` therefore lands next to your .blend file, so save the project first. Edit the field to choose a different location. The manual does not state a factory default for the field, so read what your own file shows.

In the 5.2 manual, the Output panel header also has a checkbox that toggles automatic saving of renders. When it is enabled (the default), animation renders are written to the output path. When it is disabled, Blender writes nothing from this panel and relies on other output such as Compositor File Output nodes, or reports an error if none exists. The 5.0 and 5.1 manual pages for this panel do not describe that checkbox.

## File format and quality settings

Below the path, the Output panel holds the settings that decide what kind of file you get. Names follow the 5.2 manual:

- **Media Type:** Image (each input as a separate image file), Multi-Layer EXR (all inputs in one multi-layer OpenEXR file) or Video (frames encoded into a video container, with options in the Encoding panel). The 4.5 manual has no Media Type setting; File Format sits directly in the panel.
- **File Format:** the image format to save to. Channels, bit depth and compression options change with the format.
- **Color:** BW, RGB or RGBA. RGBA is not available for every format.
- **Saving > File Extensions:** adds the correct extension for the chosen file type to output files.
- **Image Sequence > Overwrite and Placeholders:** Overwrite replaces existing files when rendering; Placeholders creates empty placeholder frames while rendering.

Which format should you choose? The manual's own rule of thumb in the [supported image formats](https://docs.blender.org/manual/en/latest/files/media/image_formats.html) list is: use OpenEXR if you plan to composite or color grade, PNG for on-screen output or encoding into several video formats, and JPEG for on-screen output where file size matters and quality loss is acceptable. PNG, OpenEXR and WebP support alpha; JPEG does not.

A practical point for animations: the manual recommends rendering to a still image format first rather than directly to a video file, because if a problem occurs the video can become unplayable and every frame must be re-rendered. With image files you can disable Overwrite and restart where you left off.

## The temporary directory and Preferences paths

Blender also writes files you never chose. The manual's [directory layout page](https://docs.blender.org/manual/en/latest/advanced/blender_directory_layout.html) says the temporary directory is used to store various files at run-time, including render layers, the physics cache, the copy-paste buffer and crash logs. Blender picks it in this order:

1. The user preference (Preferences > File Paths).
2. Environment variables: `TEMP` on Windows, `TMP` and `TMP_DIR` on other platforms.
3. The `/tmp/` directory.

In Preferences, open *File Paths*. Under *Data*, *Temporary Files* sets the directory for temporary save files. The [File Paths preferences page](https://docs.blender.org/manual/en/latest/editors/preferences/file_paths.html) says the path must reference an existing directory or Blender ignores it and uses the system temporary directory, and that leaving it blank also uses the system directory. Under *Render*, *Render Output* is described as where rendered images and videos are saved, and *Render Cache* is where cached render images are stored.

The cache connects to the Output panel's *Cache Result* option. When enabled, Blender saves the rendered view layers and passes to a multi-layer OpenEXR in the Render Cache folder. Later, *Image > Open Cached Render* (Ctrl+R) loads it back into Render Result, even after restarting Blender. The manual notes that Blender does not create these cache files by default: you must enable Cache Result and render at least once. That is the only built-in way to recover a still after restarting, and it does not replace saving the final image.

## Learn this in order with The Blender Launchpad

Output settings are one small piece of rendering, and they make more sense once you know what a camera, a light and a render engine are doing. [The Blender Launchpad](https://blenderlaunchpad.site/) is a members app with a roadmap of hand picked, free YouTube lessons in six stages, from Blender basics through studio lighting and rendering in Cycles and EEVEE. Stage 1 assumes you have never opened Blender.

It is a curated playbook rather than original video lessons, so every step points to a lesson you can watch and pause. It is a one-time payment with no subscription. When you reach the lighting and rendering stage, this post's settings will already be familiar.

For the render itself, see [how to render in Blender](https://blenderlaunchpad.site/blog/how-to-render-in-blender/) and [how to render an animation in Blender](https://blenderlaunchpad.site/blog/how-to-render-animation-in-blender/). If your PNG needs a see-through background, read [how to render with a transparent background](https://blenderlaunchpad.site/blog/how-to-render-transparent-background-in-blender/). For choosing an engine first, there is [EEVEE vs Cycles](https://blenderlaunchpad.site/blog/blender-eevee-vs-cycles/).

## Questions people also ask

### Where is my Blender render saved?

A still render is held in Render Result and is not saved until you choose Image > Save As. An animation render is written to the File Path in Output Properties as it renders.

### How do I save a render in Blender?

In the render window or Image Editor, choose Image > Save As (Shift+Alt+S), pick a folder and file format, and confirm. The settings match Output Properties.

### How do I change where Blender saves animation renders?

Open Output Properties, go to the Output panel and edit File Path. A `//` prefix means the folder of the current blend-file.

### Where does Blender keep temporary files?

In the temporary directory: the path set in Preferences > File Paths, otherwise the TEMP (Windows) or TMP and TMP_DIR environment variables, otherwise `/tmp/`.

### How do I get a closed render back?

Only if Cache Result was enabled before the render: use Image > Open Cached Render (Ctrl+R). Otherwise a still render that was not saved must be rendered again.

## How we checked this

Blender Manual (5.2 LTS), read November 4, 2026: Output properties (Output panel), Rendering Animations, Render Output introduction, Image Editor introduction and Editing Images, Preferences > File Paths, Preferences > Interface (Temporary Editors), the Topbar Render menu, Supported Image Formats, the Animation Player page and the Blender directory layout page. We also compared the Output panel pages of the 4.5, 5.0 and 5.1 manuals. We did not run Blender, so menu labels come from the manual rather than a test.
